Delta MS300 Series User Manual page 259

Chapter 11 Summary of Parameter SettingsMS300
Pr. Explanation
Communication Card
09-85 Gateway Address 2

(for EtherNet)
Communication Card
09-86 Gateway Address 3

(for EtherNet)
Communication Card
09-87 Gateway Address 4

(for EtherNet)
Communication Card
09-88 Password (Low Word)

(for EtherNet)
Communication Card
09-89 Password (High Word)

(for EtherNet)
Reset Communication Card
09-90

(for EtherNet)
Additional Settings for the
09-91 Communication Card

(for EtherNet)
Communication Card Status
09-92
(f+or EtherNet)
Settings
0–255
0–255
0–255
0–99
0–99
0: Disable
1: Reset to defaults
bit 0: Enable IP filter
bit 1: Enable internet parameters (1 bit)
When the IP address is set, this bit is enabled.
After updating the parameters for the
communication card, this bit changes to disabled.
bit 2: Enable login password (1 bit)
When you enter the login password, this bit is
enabled. After updating the communication card
parameters, this bit changes to disabled.
bit 0: Enable password
When the communication card is set with a
password, this bit is enabled. When the password
is cleared, this bit is disabled.
250
Default
0
0
0
0
0
0
0
0