Delta MS300 Series User Manual page 220

Pr. Explanation
Maximum User-Defined
00-26
Value
00-27 User-Defined Value
00-29 Local / Remote Selection
Master Frequency
00-30 Command Source

(HAND, LOCAL)
Chapter 11 Summary of Parameter SettingsMS300
013xh: degC
014xh: degF
015xh: mbar
016xh: bar
017xh: Pa
018xh: kPa
019xh: mWG
01Axh: inWG
01Bxh: ftWG
01Cxh: psi
01Dxh: atm
01Exh: L/s
01Fxh: L/m
020xh: L/h
021xh: m3/s
022xh: m3/h
023xh: GPM
024xh: CFM
xxxxh: Hz
0: Disable
0–65535
(when Pr.00-25 is set to no decimal place)
0.0–6553.5
(when Pr.00-25 is set to one decimal place)
0.00–655.35
(when Pr.00-25 is set to two decimal places)
0.000–65.535 (when Pr.00-25 is set to three decimal places)
Read only
0: Standard HOA function
1: When switching between local and remote, the drive
stops.
2: When switching between local and remote, the drive
runs with REMOTE settings for frequency and
operating status.
3: When switching between local and remote, the drive
runs with LOCAL settings for frequency and operating
status.
4: When switching between local and remote, the drive
runs with LOCAL settings when switched to Local and
runs with REMOTE settings when switched to Remote
for frequency and operating status.
0: Digital keypad
1: RS-485 communication input
2: External analog input (refer to Pr.03-00)
211
Settings Default
0
Read only
0
0