Delta MS300 Series User Manual page 736

API
EADD
120
D P
bit device
X Y M K
＊
S1
＊
S2
D
Notes on operand usage:
Refer to the function specifications table for each device in series
for the scope of device usage.
 S : addend. S
1
 Adds the content of the register designated by S
designated by S
is performed entirely using binary floating point numbers.
 If the source operand S
converts that constant into a binary floating point number for use in addition.
 In the situation when S
"continuous execution" command is employed, when conditional contact is ON,
the register performs addition once during each scan. You generally use Pulse
execution type commands (DEADDP) under ordinary circumstances.
 When X0 = ON, adds a binary floating point number (D1, D0) to a binary
floating point number (D3, D2), and stores the results in (D11, D10).
 When X2 = ON, adds a binary floating point number (D11, D10) to K1234
(which is automatically converted to a binary floating point number), and stores
the results in (D21, D20).
X2
Word device
H KnX KnY KnM T
＊
＊
: augend. D: sum.
2
, and stores the result in the register designated by D. Addition
1
1
and S
1
DEADD D10
Chapter 16 PLC Function ApplicationsMS300
Add binary floating point numbers
16-bit command
C D
－
＊
32-bit command (9 STEP)
＊
Continuous
DEADD
＊
execution type
Flag signal: none
2
or S designates a constant K or H, the command
2
designate identical register numbers, if a
2
K1234 D20
727
－ －
Pulse
DEADDP
execution type
to the content of the register
－