Delta MS300 Series User Manual page 172

Parameters
09-78 IP address 3
09-79 IP address 4
09-80 Netmask 1
09-81
Netmask 2
09-82 Netmask 3
09-83 Netmask 4
09-84 Default gateway 1
09-85 Default gateway 2
09-86 Default gateway 3
09-87 Default gateway 4
8-4-6 LED Indicator & Troubleshooting
There are four LED indicators on the CMM-EIP02: NET1 (NS), NET2 (MS), POWER LED and LINK
LED. NET1 displays the network status, NET2 displays the module status. POWER LED displays the
status of the working power. LINK LED displays the connection status of the communication.
LED Indicators
LED Indicators
The red and green
lights flash alternately
NET1
(NS)
Red
Green
The red and green
lights flash alternately
NET2
Red
(MS)
Green
Orange
POWER
Orange
LINK
Function Current Setting Value
Status
Self-test of network status
OFF Network not connected
ON Duplicate IP
Communication time out /
Flashes
disconnected / IP changed
ON Network connection in normal status No action is required
Flashes Sending / receiving network packet
Self-test of product status
OFF No power supply
ON An error cannot be restored occurs
Flashes An error can be restored occurs
ON The parameter setting finished
Flashes No parameter setting
ON Power supply in normal status
OFF No power supply
On Network connection in normal status No action is required
Flashes Sending / receiving network packet
OFF Network not connected
1 IP address 192.168.1.5
5 IP address 192.168.1.5
255 Netmask 255.255.255.0
255 Netmask 255.255.255.0
255 Netmask 255.255.255.0
0 Netmask 255.255.255.0
192 Default gateway 192.168.1.1
168 Default gateway 192.168.1.1
1 Default gateway 192.168.1.1
1 Default gateway 192.168.1.1
Indication
163
Chapter 8 Option CardsMS300
Description
Table 8-24
Corrective Action
No action is required
Check if the network cable is
connected
Check if the IP setting is wrong
Check if the communication
setting is wrong
No action is required
No action is required
Check the power supply
Hardware malfunction, contact
with the dealer
Check if any parameter setting is
wrong
No action is required
Follow manual instructions to set
parameters
No action is required
Check the power supply
No action is required
Check if the network cable is
connected
Table 8-25