Digi LR54 User Manual page 597

Services
(config)> service web_admin legacy_encryption value
(config)>
where value is one of:
TLS-1_1
n
TLS-1_2
n
TLS-1_3
n
The default is TLS-1_2.
8. (Optional) Disable legacy port redirection.
Legacy port redirection is used to redirect client HTTP requests to the HTTPS service. Legacy
port redirection is enabled by default, and normally these settings should not be changed.
To disable legacy port redirection:
(config)> service web_admin legacy enable false
(config)>
9. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
10. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
LR54 User Guide
Configure the web administration service
597