Digi LR54 User Manual page 41

Firmware configuration
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Wi-Fi > Digi AP (Wi-Fi1).
4. Enter a new SSID and Pre-shared key.
5. Repeat the above steps for the Digi AP (Wi-Fi2) access point.
6. Click Apply to save the configuration and apply the change.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
LR54 User Guide
Reset default SSIDs and pre-shared keys for the preconfigured Wi-Fi access points
41