Digi LR54 User Manual page 294

Wi-Fi
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Configure the firewall:
a. Click Firewall > Zones.
b. In Add Zone, enter LAN2_isolation_zone for the name of the zone and click .
Note We will be creating LAN2 later in the procedure.
c. Create a firewall filter to provide internet access for the LAN2_isolation_zone:
i. For Add packet filter, click .
ii. For Label, type Allow LAN2_isolation_zone to External.
iii. For Source zone, select LAN2_isolation_zone.
iv. For Destination zone, select External.
LR54 User Guide
Use Digi Remote Manager to view and manage your
Isolate Wi-Fi clients
294