Digi LR54 User Manual page 120

Interfaces

Web
1. Log into the LR54 WebUI as a user with Admin access.
2. From the main menu, click Status > Modems.
3. For the appropriate modem, scroll to the Connection Status section and click SCAN.
The Carrier Scan window opens.
4. When the Carrier Scan window opens, the results of the most recent previous scan are
displayed. If there is no previous scan available, or to refresh the list, click SCAN.
5. The current carrier is highlighted in green. To switch to a different carrier:
a. Highlight the appropriate carrier and click SELECT.
The Carrier selection dialog opens.
b. For Carrier selection mode, select one of the following:
n
n
LR54 User Guide
Manual/Automatic: The device will use automatic carrier selection if this carrier is
not available.
Manual: Does not allow the device to use automatic carrier selection if this carrier
is not available.
Note If Manual is selected, your modem must support the Network technology or
the modem will lose cellular connectivity. If you are using a cellular connection to
Wide Area Networks (WANs)
120