Digi LR54 User Manual page 257

Serial port
3. To stop serial port logging:
> system serial stop port-number
>
4. To show a serial port's logging status:
> system serial show port-number
Logging is active on port-number.
>
5. To clear the serial port log:
> system serial clear port-number
>
6. To save the serial port log:
> system serial save port-number path
>
where path is the path and file name to save captured traffic to. If a relative path is provided,
/etc/config/serial will be used as the root directory for the path and file.
7. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
LR54 User Guide
Log serial port messages
257