Digi LR54 User Manual page 694

Hide thumbs Also See for LR54:

Table of Contents

c. Repeat for each appropriate Ethernet device.

8. Create a new network interface that is linked to the Ethernet bond:

a. Click Network > Interface.

b. For Add Interface, type a name for the interface and click .

c. For Device, select the Ethernet bond created above:

d. Complete the rest of the interface configuration. See

Configure a Local Area Network (LAN)

e. Disable any other interfaces associated with the devices that were added to the Ethernet

For example, if ETH1 and ETH2 were added to the Ethernet bond, disable the WAN1 and

LAN1 interfaces:

In some cases, the device may be a part of a bridge, in which case you should remove the

device from the bridge.

LR54 User Guide

Ethernet network bonding

Configure a Wide Area Network (WAN)

for further information.