Digi LR54 User Manual page 184

Interfaces
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Configure DHCP options
You can configure DHCP servers running on your LR54 device to send certain specified DHCP options
to DHCP clients. You can also set the user class, which enables you to specify which specific DHCP
clients will receive the option. You can also force the command to be sent to the clients.
DHCP options can be set on a per-LAN basis, or can be set for all LANs. A total of 32 DHCP options can
be configured.
Required configuration items
DHCP option number.
n
Value for the DHCP option.
n
Additional configuration items
The data type of the value.
n
Force the option to be sent to the DHCP clients.
n
A label for the custom option.
n
LR54 User Guide
Local Area Networks (LANs)
184