Intelliflow; Enable Intelliflow - Digi LR54 User Manual

Monitoring

intelliFlow

intelliFlow monitors system information, network data usage, and traffic information, and displays
the information in a series of charts available in the local WebUI. To use intelliFlow, the LR54 must be
powered on and you must have access to the local WebUI. Once you enable intelliFlow, the Status >
intelliFlow option is available in the main menu. By default, intelliFlow is disabled.
intelliFlow provides charts on the following information:
System utilisation
n
Top data usage by host
n
Top data usage by server
n
Top data usage by service
n
Host data usage over time
n
intelliFlow charts are dymanic; at any point, you can click inside the chart to drill down to view more
granular information, and menu options allow you to change various aspects of the information being
displayed.
Note When intelliFlow is enabled and the device is connected to Digi aView, it adds an estimated
50MB of data usage for the device by reporting the metrics to aView. intelliflow does not currently
work with Digi Remote Manager.

Enable intelliFlow

Required configuration items
Enable intelliFlow.
n
Additional configuration items
The firewall zone for internal clients being monitored by intelliFlow.
n
To enable intelliFlow:

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
LR54 User Guide
Use Digi Remote Manager to view and manage your
intelliFlow
952