Digi LR54 User Manual page 649

Services
This defines a square-shaped polygon equivalent to the following:
7. Define actions to be taken when the device's location triggers a geofence event:
To define actions that will be taken when the device enters the geofence, or is inside
n
the geofence when it boots:
a. Click to expand On entry.
b. (Optional) Enable Bootup action to configure the device to perform the On entry
c. For Number of intervals, type or select the number of
d. Click to expand Actions.
e. Click  to create a new action.
f. For Action type, select either:
LR54 User Guide
actions if the device is inside the geofence when it boots.
take place prior to performing the On entry actions.
For example, if the Update interval is 1m (one minute) and the Number of
intervals is 3, the On entry actions will not be performed until the device has been
inside the geofence for three minutes.
Factory erase to erase the device configuration when the action is triggered.
l
Custom script to execute a custom script when the action is triggered.
l
If Custom script is selected:
i. Click to expand Custom script.
ii. For Commands, type the script that will be executed when the action is
triggered. If the script begins with #!, then the proceeding file path will be used
to invoke the script interpreter. If not, then the default shell will be used.
iii. Enable Log script output to log the output of the script to the
Location information
Update Intervals that must
system log.
649