Digi LR54 User Manual page 433

Routing
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Status > VRRP.
The Virtual Router Redundancy Protocol window is displayed.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type
> show vrrp
VRRP
----
VRRP_test
VRRP_test
>
3. To display additional information about a specific VRRP instance, at the Admin CLI prompt,
type show vrrp name
LR54 User Guide
show vrrp:
Status Proto State
------ ----- ------
Up IPv4 Backup
Up IPv4 Backup
name:
Virtual Router Redundancy Protocol (VRRP)
Virtual IP
-------------
10.10.10.1
100.100.100.1
433