Customize The Hotspot Login Page - Digi LR54 User Manual

Hide thumbs Also See for LR54:

Table of Contents

Customize the hotspot login page

The LR54 device provides three sample HTML webpages for use with the hotspot feature. When

hotspot is enabled for the first time, the sample webpages are installed to the /etc/config/hotspot

folder on the device's filesystem. By default, the hotspot redirects users to one of the sample

webpages based on the authentication mode being used. See

information about which HTML file is used for each authentication mode. The sample HTML webpages

use ChilliLibrary.js to perform authentication. Do not modify ChilliLibrary.js.

You can customize the sample HTML pages, or replace them with your own page, so that hotspot

users will be redirected to your custom HTML page when they log into the hotspot. You can also host

the HTML pages on an external web server, rather than on the LR54 device. See

for information about configuring the HTML page that the hotspot will use.

This section contains the following topics:

Edit sample hotspot HTML pages

Upload custom hotspot HTML pages

Restore hotspot default sample pages

LR54 User Guide

Customize the hotspot login page

Hotspot authentication modes

Create a new hotspot