Digi LR54 User Manual page 594

Services
Repeat this step to list additional interfaces.
To limit access based on firewall zones:
n
(config)> add service web_admin acl zone end value
(config)>
Where value is a firewall zone defined on your device, or the any keyword.
Repeat this step to include additional firewall zones.
4. (Optional) If you have your own signed SSL certificate, if you have your own signed SSL
certificate, set the certificate and private key by pasting their contents into the service web_
admin cert command. Enclose the certificate and private key contents in quotes (").
LR54 User Guide
Interfaces
Additional Configuration
-------------------------------------------
defaultip
defaultlinklocal
lan1
loopback
wan1
wwan
(config)>
Display a list of available firewall zones:
Type ... firewall zone ? at the config prompt:
(config)> ... firewall zone ?
Zones: A list of groups of network interfaces that can be
referred to by packet
filtering rules and access control lists.
Additional Configuration
--------------------------------------------------------
-----------------------
any
dynamic_routes
edge
external
hotspot
internal
ipsec
loopback
setup
(config)>
Configure the web administration service
Default IP
Default Link-local IP
LAN1
Loopback
WAN1
WWAN
594