Digi LR54 User Manual page 264

Wi-Fi
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi.
4. Click to expand the appropriate Wi-Fi radio.
5. For Frequency band, select 5 GHz.
6. Click to enable DFS Client Support.
Note When DFS Client Support is enabled, any enabled access points that use this radio will
not be started and cannot be used as access points.
7. Click Apply to save the configuration and apply the change.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
LR54 User Guide
Configure the Wi-Fi radio to support DFS channels in client mode
Use Digi Remote Manager to view and manage your
264