Digi LR54 User Manual page 98

Interfaces
5. After selecting the WAN or WWAN, click IPv4 > SureLink.
6. Click to expand Test targets.
7. Click to expand the second test target. This test target has its Test type set to Test DNS
servers configured for this interface.
8. Click the menu icon (...) next to the target and select Delete.
9. Click Apply to save the configuration and apply the change.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Change to WAN or WWAN's node in the configuration schema. For example, to disable SureLink
for an interface named my_wan:
(config)> network interface my_wan
(config network interface my_wan)>
LR54 User Guide
Wide Area Networks (WANs)
98