Configure Web Filtering With Manual Dns Servers - Digi LR54 User Manual

Firewall
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, use the
deletion:
> rm /etc/config/web-filter-id
rm: remove '/etc/config/web-filter-id'? yes
>
3. Restart the web filtering service:
> config firewall web-filter enable false
> config firewall web-filter enable true
>

Configure web filtering with manual DNS servers

Required configuration items
Enable web filtering.
n
The IP address of one or more DNS servers. Cisco provides two open DNS servers for web
n
filtering:
208.67.222.220
l
208.67.220.222
l
See https://www.opendns.com/setupguide/
servers for web filtering.
To configure web filtering with manual DNS servers:

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
LR54 User Guide
rm command to delete the web-filter-id file, and confirm the
for more information about using Cisco DNS
Use Digi Remote Manager to view and manage your
Web filtering
891