Digi LR54 User Manual page 275

Wi-Fi
4. Set the SSID for the appropriate access point:
(config)> network wifi ap digi_ap1 ssid my_SSID
(config)>
5. SSID broadcasting is enabled by default for the preconfigured access points. If SSID
broadcasting is disabled:
(config)> network wifi ap digi_ap1 ssid_broadcast true
(config)>
6. Set the security for the access point to an open security method:
(config network wifi ap new_AP)> encryption type value
(config network wifi ap new_AP)>
where value is either:
none: No encryption is used.
n
owe: Uses WPA3 Enhanced Open, which uses Opportunistic Wireless Encryption (OWE)
n
technology to provide encryption for Wi-Fi networks that do not use password
protection.
Note
have WPA3 capabilities.
7. (Optional) Determine whether to prevent clients that are connected to this access point from
communicating with each other:
(config)> network wifi ap digi_ap1 isolate_client true
(config)>
See Isolate Wi-Fi clients
access points from communicating with each other.
8. (Optional) Change the Wi-Fi radio for the access point:
a. Show available radios:
(config)> network wifi radio ?
Additional Configuration
---------------------------------------------------------------------
----------
wifi1
wifi2
(config)>
b. Set the appropriate radio:
(config)> network wifi ap digi_ap1 radio wifi1
(config)>
9. (Optional) Set the amount of time to wait before changing the group key.
LR54 User Guide
Only select owe if you know that all Wi-Fi clients connecting to this device will
for information about how to prevent clients connected to different
Configure an open Wi-Fi access point
Wi-Fi1 radio
Wi-Fi2 radio
275