Digi LR54 User Manual page 505

Virtual Private Networks (VPN)
e. Click  to add a tunnel.
f. For Tunnel, select an OpenVPN tunnel to which users of this group will have access.
g. Repeat to add additional OpenVPN tunnels.
4. Add an OpenVPN authentication user:
a. Click Authentication > Users.
b. For Add, type a name for the user (for example, OpenVPN_User) and click .
c. Type a password for the user.
This password is used for local authentication of the user. You can also configure the user
to use RADIUS or TACACS+ authentication by configuring authentication methods. See
User authentication methods
d. Click to expand the Groups node.
e. Click  to add a group to the user.
f. Select a Group with OpenVPN access enabled.
LR54 User Guide
for information.
OpenVPN
505