Digi LR54 User Manual page 960

Monitoring

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Monitoring > NetFlow probe.
4. Enable NetFlow probe.
5. Protocol version: Select the Protocol version. Available options are:
NetFlow v5—Supports IPv4 only.
n
NetFlow v9—Supports IPv4 and IPv6.
n
LR54 User Guide
Use Digi Remote Manager to view and manage your
Configure NetFlow Probe
960