Digi LR54 User Manual page 918

System administration
3. On the main menu, click System. Under Administration, click Firmware Update.
4. Click Choose file.
5. Browse to the location of the firmware on your local file system and select the file.
6. Click Update Firmware.

Command line
1. Download the LR54 operating system firmware from the Digi Support FTP site to your local
machine.
2. Select the device in Remote Manager and click Actions > Open Console, or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
3. Load the firmware image onto the device. We recommend using the /tmp directory.
> scp host hostname-or-ip user username remote remote-path local local-
path to local
where:
hostname-or-ip is the hostname or ip address of the remote host.
n
username is the name of the user on the remote host.
n
remote-path is the path and filename of the file on the remote host that will be copied
n
to the LR54 device.
local-path is the location on the LR54 device where the copied file will be placed.
n
For example:
> scp host 192.168.4.1 user admin remote /home/admin/bin/LR54-
22.8.33.50.bin local /tmp/ to local
admin@192.168.4.1's password: adminpwd
LR54-22.8.33.50.bin
>
4. Verify that the firmware file has been successfully uploaded to the device:
> ls /tmp
-rw-r--r--
22.8.33.50.bin
-rw-r--r--
LR54 User Guide
1 root root
1 root root
Update system firmware
100% 36MB
37511229 May 16 20:10 LR54-
2580 May 16 16:44 blank.json
11.1MB/s 00:03
918