Digi LR54 User Manual page 302

Wi-Fi
3. Click Network > WiFi > Client mode connections.
4. For Add WiFi client:, type the name of the client and click .
The Wi-Fi client configuration window is displayed.
New Wi-Fi clients are enabled by default. To disable, toggle off Enable.
5. For Radio, select the appropriate Wi-Fi radio.
6. Configure the Wi-Fi network that the client will use:
a. Click to expand SSID list.
b. Enter the SSID of the access point that the client will use to connect to the Wi-Fi network.
c. Select the type of Encryption used by the access point.
n
n
LR54 User Guide
If a personal or mixed mode is selected, for Pre-shared key, enter the password
that the client will use to connect to the access point.
If WPA2 Enterprise is selected:
Select the Extensible Authentication Protocol (EAP), one of:
l
TLS: Client certificate authentication.
o
If TLS is selected, include:
o The Username.
The CA certificate in PEM format.
o
The Client certificate in PEM format.
o
Configure a Wi-Fi client and add client networks
302