Log Serial Port Messages - Digi LR54 User Manual

Serial port
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Log serial port messages

To display and configure the serial port log:

Web
1. Log into the LR54 WebUI as a user with Admin access.
2. On the main menu, click Status
3. Under Connections, click Serial.
4. Click Log.
The Serial port log window displays.
5. Click Start to start serial port logging.
6. Click Stop to stop serial port logging if it has been started.
7. Click Refresh to refresh the log display.
8. Click Download to download the serial port log.
9. (Optional) For Log size, configure the maximum allowed log size for the serial port log. The
default is 65536.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. To start serial port logging:
> system serial start port-number
>
For example, to start serial port logging on serial port 1:
> system serial start port1
>
You can also set the maximum allowed log size for the serial port log when starting the
n
log:
> system serial start port-number size int
>
The default is 65536.
LR54 User Guide
Log serial port messages
256