Digi LR54 User Manual page 297

Wi-Fi
b. Set the Wi-Fi radio for the new access point:
i. Show available radios:
(config network wifi ap new_AP)> radio ?
Radio: The Wi-Fi radio to run this access point on.
Format:
Current value:
(config network wifi ap new_AP)>
ii. Set the appropriate radio:
(config network wifi ap new_AP)> radio wifi1
(config network wifi ap new_AP)>
c. Set the SSID for the Wi-Fi access point. Up to 32 characters are allowed.
(config network wifi ap new_AP)> ssid my_SSID
(config network wifi ap new_AP)>
d. Set the security for the access point:
(config network wifi ap new_AP)> encryption type value
(config network wifi ap new_AP)>
where value is one of:
n
n
n
n
e. Complete other encryption-related fields as appropriate based on the type of encryption.
See Configure an open Wi-Fi access
security, or
4. Configure the firewall:
a. Return to the root config prompt by typing three periods (...):
(config network wifi ap new_AP)> ...
(config)>
b. Add a new firewall zone named LAN2_isolation_zone. We will be creating LAN2 later in
the procedure.
(config)> add firewall zone LAN2_isolation_zone
(config firewall zone LAN2_isolation_zone)>
LR54 User Guide
wifi1
wifi2
none
psk
psk2
wpa2:
Configure a Wi-Fi access point with enterprise security
point, Configure a Wi-Fi access point with personal
Isolate Wi-Fi clients
for details.
297