Digi LR54 User Manual page 359

Hotspot
3. Create a new hotspot
4. Set the authentication mode to hotspotsystem:
(config)> network hotspot hotspot_name auth hotspotsystem
(config)>
5. Configure HotspotSystem:
a. Set the operator name that you registered with hotspotsystem.com.
(config)> network hotspot hotspot_name hotspotsystem operator name
(config)>
b. Set the location ID of this hotspot.
(config)> network hotspot hotspot_name hotspotsystem location value
(config)>
where value is any integer. The default is 1.
6. Set walled garden settings.
Walled garden settings define the "white list" of domains and subnets that unauthenticated
clients are able to access. Include the domain or subnet of supporting servers for payment or
other external login and authentication (such as social media sites).
Add domains that can be accessed by the client prior to authentication:
n
(config network hotspot new_hotspot)> add walled_garden domains end
domain_name
(config network hotspot new_hotspot)>
Repeat to add additional domains.
Add IP addresses and subnets that can be accessed by the client prior to
n
authentication:
(config network hotspot new_hotspot)> add walled_garden subnets end
value
(config network hotspot new_hotspot)>
where value is an IPv4 address and optional subnet mask, using the format IPv4_
address[/netmask], or the keyword any.
Repeat to add additional IP addresses or subnets.
7. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
8. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
LR54 User Guide
or Enable hotspot using the default
Hotspot configuration
configuration.
359