Digi LR54 User Manual page 789

User authentication
5. Click the following options, as appropriate, to enable or disable access rights for each:
Admin access
n
For groups assigned Admin access, you can also determine whether the Access level
should be Full access or Read-only access.
where value is either:
l
l
The default is Full access full.
Serial access
n
6. (Optional) Configure the serial ports to which users of this group have access:
a. Click Serial ports to expand the Serial ports node.
b. For Add Port, click .
c. In the Port dropdown, select a port.
d. Click  again to add additional serial ports.
7. (Optional) Configure OpenVPN access. See for further information.
8. (Optional) Configure captive portal access:
a. Enable captive portal access rights for users of this group by checking the box next to
Captive portal access.
b. Click Captive portals to expand the Captive portal node.
c. For Add Captive portal, click .
d. In the Captive portal dropdown, select a captive portal to which users of this group will
have access.
e. Click  again to add additional captive portals.
9. Interactive shell access
Shell access is not available if the Allow shell parameter has been disabled. See
access for more information about the Allow shell parameter.
LR54 User Guide
Full access full: provides users of this group with the ability to manage the LR54
device by using the WebUI or the Admin CLI.
Read-only access read-only: provides users of this group with read-only access to
the WebUI and Admin CLI.
Authentication groups
Disable shell
789