Digi LR54 User Manual page 674

Services
1. Log into the LR54 WebUI as a user with Admin access.
2. On the menu, select Status > Modbus Gateway.
The Modbus Gateway page appears.
Statistics related to the Modbus gateway server are displayed. If the message Server
connections not available is displayed, this indicates that there are no connected clients.
To view information about Modbus gateway clients, click Clients.
n
To view statistics that are common to both the clients and server, click Common
n
Statistics.
To view configuration details about the gateway, click the  (configuration) icon in the
n
upper right of the gateway's status pane.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the show modbus-gateway
> show modbus-gateway
Server Connection
-----------------
modbus_socket
modbus_socket
Client
--------------------
modbus_socket_41
modbus_socket_21
modbus_serial_client
>
If the message Server connections not available is displayed, this indicates that there are no
connected clients.
3. Use the show modbus-gateway verbose
information:
> show modbus-gateway verbose
Client
--------------------
modbus_socket_41
modbus_socket_21
modbus_serial_client
Common Statistics
-----------------
LR54 User Guide
command at the system prompt:
IP Address Port
----------- -----
10.45.1.139 49570
10.45.1.139 49568
Uptime
------
0
0
428
command at the system prompt to display more
Uptime
------
0
0
506
Uptime
------
6
13
Modbus gateway
674