Digi LR54 User Manual page 474

Virtual Private Networks (VPN)
LR54 User Guide
(config vpn ipsec tunnel ipsec_example surelink target 0)>
interface_timeout 600s
(config vpn ipsec tunnel ipsec_example surelink target 0)>
The default is 60 seconds.
other: Allows you to test another interface's status, to create a failover or
l
coupled relationship between interfaces:
(config vpn ipsec tunnel ipsec_example surelink target 0)>
other value
(config vpn ipsec tunnel ipsec_example surelink target 0)>
If other is set:
Set the alternate interface to be tested:
o
i. Use the ? to determine available interfaces:
(config vpn ipsec tunnel ipsec_example surelink
target 0)> other_interface ?
Interface: The network interface.
Format:
/network/interface/defaultip
/network/interface/defaultlinklocal
/network/interface/lan1
/network/interface/lan_hotspot
/network/interface/loopback
/network/interface/wan1
/network/interface/wwan
Current value:
(config vpn ipsec tunnel ipsec_example surelink
target 0)> other_interface
ii. Set the interface. For example:
(config vpn ipsec tunnel ipsec_example surelink
target 0)> other_interface /network/interface/wan1
(config vpn ipsec tunnel ipsec_example surelink
target 0)>
o Set the alternate interface's IP version. This allows you to determine the
alternate interface's status for a particular IP version.
(config vpn ipsec tunnel ipsec_example surelink target 0)>
other_ip_version value
(config vpn ipsec tunnel ipsec_example surelink target 0)>
where value is one of: any, both, ipv4, or ipv6.
Set the expected status of the alternate interface:
o
IPsec
474