Digi LR54 User Manual page 358

Hotspot
3. Create a new hotspot
4. During hotspot configuration, for Authentication mode, select HotspotSystem.
5. Click to expand HotspotSystem.
a. For Operator name, type the operator name that you registered with
hotspotsystem.com.
b. For Location ID, type the location ID of this hotspot. The default is 1.
6. Click to expand Walled garden.
Walled garden settings define the "white list" of domains and subnets that unauthenticated
clients are able to access. Include the domain or subnet of supporting servers for payment or
other external login and authentication (such as social media sites).
To add domains that can be accessed by the client prior to authentication:
n
a. Click to expand Allowed domains.
b. Click  to add a domain.
c. For Domain, type the hostname of the allowed domain.
d. Repeat to add additional domains.
To add subnets that can be accessed by the client prior to authentication:
n
a. Click to expand Allowed subnets.
b. Click  to add a subnet.
c. For Subnet, type an IPv4 address and optional subnet mask, using the format IPv4_
d. Repeat to add additional subnets.
7. Click Apply to save the configuration and apply the change.

Configure hotspot for HotspotSystem authentication from the Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
LR54 User Guide
or Enable hotspot using the default
address[/netmask], or the keyword any.
Hotspot configuration
configuration.
358