Set Up The Lr54 To Automatically Run Your Applications; Configure Scripts To Run Automatically - Digi LR54 User Manual

Applications
},
"disk_usage": {
"/opt": disk_opt,
"/etc/config:": disk_config,
"ram": ram_used
}
})
client.publish(PREFIX_EVENT + "/system", json.dumps(msg))
runt.start()
serial = runt.get("system.serial")
PREFIX = "router/" + serial
PREFIX_EVENT = "event/" + PREFIX
PREFIX_CMD = "cmd/" + PREFIX
PREFIX_RSP = "rsp/" + PREFIX
client = mqtt.Client()
client.on_connect = on_connect
client.on_message = on_message
try:
client.connect("192.168.1.100", 1883, 60)
client.loop_start()
except:
print("Failed to connect to MQTT server")
sys.exit(1)
while True:
publish_dhcp_leases()
publish_system()
time.sleep(POLL_TIME)

Set up the LR54 to automatically run your applications

This section contains the following topics:

Configure scripts to run automatically

n
Show script information
n
Stop a script that is currently running
n
Configure scripts to run automatically
You can configure a script or a python application to run automatically when the system restarts, at
specific intervals, or at a specified time. By default, scripts execute in a "sandbox," which restricts
access to the file system and available commands that can be used by the script.
Required configuration items
Upload or create the script. The script must be uploaded to /etc/config/scripts or a
n
subdirectory.
Enable the script.
n
LR54 User Guide
Set up the LR54 to automatically run your applications
754