Upload A New Lxc Container - Digi LR54 User Manual

Hide thumbs Also See for LR54:

Table of Contents

The LR54 device includes support for LXC Linux containers. LXC containers are a lightweight,

operating system level method of virtualization that allows you to run one or more isolated Linux

instances on a the same host using the host's Linux kernal.

Container support must be enabled in Digi Remote Manager. Contact your Digi sales

representative for information.

Upload a new LXC container

1. Log into the LR54 WebUI as a user with Admin access.

2. From the main menu, click Status. Under Services, click Containers.

3. Click Upload New Container.

4. From your local file system, select the container file in *.tgz format.

You can download a simple example container file, test_lxc.tgz, from the Digi website.

5. Create Configuration is selected by default. This will create a configuration on the device for

the container when it is installed. If deselected, you will need to create the configuration

6. Click Apply.

7. If Create Configuration was selected when the container was created, click  to go to the

container configuration.

Configure a container

LR54 User Guide

for further information about configuring the container.