Debug An Ipsec Configuration - Digi LR54 User Manual

Hide thumbs Also See for LR54:

Table of Contents

Virtual Private Networks (VPN)

4. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

Debug an IPsec configuration

If you experience issues with an IPsec tunnel not being successfully negotiated with the remote end of

the tunnel, you can enable IPsec debug messages to be written to the system log. See

and event logs

for more information about viewing the system log.

1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access

2. Access the device configuration:

Remote Manager:

a. Locate your device as described in

b. Click the Device ID.

c. Click Settings.

d. Click to expand Config.

Local Web UI:

a. On the menu, click System. Under Configuration, click Device Configuration.

The Configuration window is displayed.

LR54 User Guide

: 192.168.2.1

Use Digi Remote Manager to view and manage your