Configure The Location Service - Digi LR54 User Manual

Services

Configure the location service

The location service is enabled by default. You can disable it, or you can enable it if it has been
disabled.

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > Location.
4. The location service is enabled by default. To disable, toggle off Enable.
LR54 User Guide
Use Digi Remote Manager to view and manage your
Location information
630