Show Web Filter Service Information - Digi LR54 User Manual

Firewall
See Configure web filtering with Cisco Umbrella
n
with Cisco Umbrella.
See Configure web filtering with manual DNS servers
n
filtering to use Cisco open DNS servers.
1. Select the device in Remote Manager and click Actions > Open Console, or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Disable web filtering:
> config firewall web-filter enable false
>
3. Attempt to connect to the Cisco test
web browser or the curl command from a Linux shell:
$ curl -I http://www.internetbadguys.com
HTTP/1.1 200 OK
Server: Apache
Content-Type: text/html; charset=UTF-8
Accept-Ranges: bytes
Date: Mon, 26 August 2022 03:41:00
X-Varnish: 4201397492
Age: 0
Via: 1.1 varnish
Connection: keep-alive
$
You should receive an "HTTP/1.1 200 OK" message, as highlighted above.
4. Return to the Admin CLI and enable web filtering:
> config firewall web-filter enable true
>
5. Attempt to connect to
$ curl -I www.internetbadguys.com
HTTP/1.1 403 Forbidden
Server: openresty/1.9.7.3
Date: Mon, 26 August 2022 03:41:00
Content-Type: text/html
Connection: keep-alive
$
You should receive an "HTTP/1.1 403 Forbidden" message, as highlighted above.

Show web filter service information

To view information about the web filter service:

Command line
LR54 User Guide
URL http://www.internetbadguys.com
http://www.internetbadguys.com
for information about configuring web filtering
for information about configuring web
again:
Web filtering
by using either a
896