Digi LR54 User Manual page 566

Virtual Private Networks (VPN)
LR54 User Guide
where value is any number of weeks, days, hours, minutes, or seconds, and
takes the format number{w|d|h|m|s}.
For example, to set interval to ten minutes, enter either 10m or 600s:
(config vpn l2tp lac lac_tunnel surelink target 0)>
interface_timeout 600s
(config vpn l2tp lac lac_tunnel surelink target 0)>
The default is 60 seconds.
other: Allows you to test another interface's status, to create a failover or
l
coupled relationship between interfaces:
(config vpn l2tp lac lac_tunnel surelink target 0)> other
value
(config vpn l2tp lac lac_tunnel surelink target 0)>
If other is set:
Set the alternate interface to be tested:
o
i. Use the ? to determine available interfaces:
(config vpn l2tp lac lac_tunnel surelink target 0)>
other_interface ?
Interface: The network interface.
Format:
/network/interface/defaultip
/network/interface/defaultlinklocal
/network/interface/lan1
/network/interface/lan_hotspot
/network/interface/loopback
/network/interface/wan1
/network/interface/wwan
Current value:
(config vpn l2tp lac lac_tunnel surelink target 0)>
other_interface
ii. Set the interface. For example:
(config vpn l2tp lac lac_tunnel surelink target 0)>
other_interface /network/interface/wan1
(config vpn l2tp lac lac_tunnel surelink target 0)>
Set the alternate interface's IP version. This allows you to determine the
o
alternate interface's status for a particular IP version.
(config vpn l2tp lac lac_tunnel surelink target 0)> other_
ip_version value
(config vpn l2tp lac lac_tunnel surelink target 0)>
L2TP
566