Digi LR54 User Manual page 374

Hide thumbs Also See for LR54:

Table of Contents

Local Web UI:

a. On the menu, click System. Under Configuration, click Device Configuration.

The Configuration window is displayed.

3. Click Network > Routes > Static routes.

4. Click the menu icon (...) for a static route and select Delete.

5. Click Apply to save the configuration and apply the change.

Command line

1. Select the device in Remote Manager and click Actions > Open Console, or log into the LR54

local command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

2. At the command line, type config to enter configuration mode:

3. Determine the index number of the static route to be deleted:

(config)> show network route static

dst 10.0.0.1

interface /network/interface/lan1

label new_static_route

LR54 User Guide