Enable Or Disable A Packet Filtering Rule - Digi LR54 User Manual

Firewall
where value is one of:
any
n
icmp
n
icmpv6
n
tcp
n
upd
n
The default is any.
9. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
10. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Enable or disable a packet filtering rule

To enable or disable a packet filtering rule:

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
LR54 User Guide
Use Digi Remote Manager to view and manage your
Packet filtering
864