Show The Routing Table - Digi LR54 User Manual

Routing
b. Enable a routing service that will be used. For example, to enable the RIP service:
(config)> network route service rip enable true
(config)>
c. Complete the configuration of the routing service. For example, use the ? to view the
available parameters for the RIP service:
(config)> network route service rip ?
Parameters
---------------------------------------------------------------------
----------
ecmp
enable
Additional Configuration
---------------------------------------------------------------------
----------
interface
neighbour
redis
timer
(config)>
5. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Show the routing table

To display the routing table:

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
LR54 User Guide
Current Value
false Allow ECMP
true Enable
Interfaces
Neighbours
Route redistribution
Timers
Use Digi Remote Manager to view and manage your
Show the routing table
401