Digi LR54 User Manual page 353

Hotspot
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Create a new hotspot
4. During hotspot configuration, for Authentication mode, select RADIUS users .
5. Click to expand Radius.
a. For Primary server name, enter the IP address or fully-qualified domain name of the
primary RADIUS server to use to authenticate hotspot users.
b. (Optional) For Secondary server name, enter the IP address or fully-qualified domain
name of the backup RADIUS server to use to authenticate hotspot users if the primary
RADIUS server is not available.
c. (Optional) For Port, type the port number to use for RADIUS authentication requests. The
default is 1812.
d. (Optional) For Accounting port, type the port number to use for RADIUS accounting
requests. The default is 1813.
e. For Secret, enter the shared secret for the RADIUS server. This is configured on the RADIUS
server.
f. For NAS ID, enter the unique Network Access Server (NAS) identifier used by the
RADIUS server. The default is hotspot.
LR54 User Guide
Use Digi Remote Manager to view and manage your
or Enable hotspot using the default
Hotspot configuration
configuration.
353