Digi LR54 User Manual page 479

Virtual Private Networks (VPN)
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > SCEP Client.
4. For Add clients, enter a name for the SCEP client and click .
The new SCEP client configuration is displayed.
5. Click Enable to enable the SCEP client.
6. For Maximum Polling Time, type the maximum time that the device will poll the SCEP server,
when operating in manual mode.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and take the
format number{w|d|h|m|s}.
For example, to set Maximum Polling Time to ten minutes, enter 10m or 600s.
The default is 1d.
7. For Polling Interval, type the amount of time that the device should wait between polling
attempts, when operating in manual mode.
LR54 User Guide
IPsec
479