Digi LR54 User Manual page 280

Wi-Fi
5. Set the SSID for the Wi-Fi access point. Up to 32 characters are allowed.
(config network wifi ap new_AP)> ssid my_SSID
(config network wifi ap new_AP)>
SSID broadcasting is enabled by default for new access points.
6. Set the security for the access point to a personal security option:
(config network wifi ap new_AP)> encryption type value
(config network wifi ap new_AP)>
where value is one of:
psk: Uses WPA Personal (PSK). All Wi-Fi clients must support WPA to be able to
n
authenticate.
mixedpsk: Uses mixed WPA/WPA2 Personal (PSK) mode. Wi-Fi clients that support WPA
n
and WPA2 are able to authenticate.
psk2: Uses WPA2 Personal (PSK) mode. All Wi-Fi clients must support WPA2 to be able
n
to authenticate.
psk2sae: Uses WPA2-PSK/WPA3-AES mixed mode. Wi-Fi clients that support WPA2 and
n
WPA3 are able to authenticate.
sae: Uses WPA3 Personal mode. All Wi-Fi clients must support WPA3 to be able to
n
authenticate.
(config network wifi ap new_AP)> encryption type psk2sae
(config network wifi ap new_AP)>
7. (Optional) Determine whether to prevent clients that are connected to this access point from
communicating with each other:
(config)> network wifi ap digi_ap1 isolate_clients true
(config)>
See Isolate Wi-Fi clients
access points from communicating with each other.
8. Set the password that clients will use when connecting to the access point:
(config network wifi ap new_AP)> encryption key_type password
(config network wifi ap new_AP)>
where key_type varies depending on the selection for encryption type, above:
If type is set to psk, key_type is key_psk.
n
If type is set to mixedpsk, key_type is key_mixedpsk.
n
If type is set to psk2, key_type is key_psk2.
n
If type is set to psk2sae, key_type is key_psk2sae.
n
If type is set to sae, key_type is key_sae.
n
LR54 User Guide
Configure a Wi-Fi access point with personal security
for information about how to prevent clients connected to different
280