Digi LR54 User Manual page 198

Interfaces
3. Create a new interface or edit an existing one:
To create a new interface named ip_passthrough_interface:
n
(config)> add network interface ip_passthrough_interface
(config network interface ip_passthrough_interface)>
To edit an existing interface named ip_passthrough_interface, change to the IP-
n
passthrough-interface node in the configuration schema:
(config)> network interface ip_passthrough_interface
(config network interface ip_passthrough_interface)>
4. Set the interface type to passthrough:
(config network interface ip_passthrough_interface)> type passthrough
(config network interface ip_passthrough_interface)>
5. Set the firewall zone to internal:
(config network interface ip_passthrough_interface)> zone internal
(config network interface ip_passthrough_interface)>
6. Select an Ethernet device or a Wi-Fi access point for this interface:
a. Enter device ? to view available devices and the proper syntax.
(config network interface my_wan)> device ?
Device: The network device used by this network interface.
Format:
/network/device/eth1
/network/device/eth2
/network/device/eth3
/network/device/eth4
/network/device/loopback
/network/bridge/hotspot_bridge
/network/bridge/lan1
/network/wireless/ap/digi_ap1
/network/wireless/ap/digi_ap2
/network/wireless/ap/digi_hotspot_ap1
/network/wireless/ap/digi_hotspot_ap2
Current value:
(config network interface ip_passthrough_interface)> device
b. Set the device for the interface:
(config network interface ip_passthrough_interface)> device device
(config network interface my_wan)>
7. Set passthrough options
LR54 User Guide
Local Area Networks (LANs)
198