Digi LR54 User Manual page 739

Applications
5. Use the position object to return the device's position:
>>> loc.position
(44.926195299999998, -93.397084499999999, 292.39999399999999)
>>>
The coordinates are returned in the following order:
latitude, longitude, altitude
altitude is in meters.
6. You can also return only one of the coordinate positions:
Use the latitude object to return the latitude:
n
>>> loc.latitude
44.926195299999998
>>>
Use the longitude object to return the longitude:
n
>>> loc.longitude
-93.397084499999999
>>>
Use the altitude object to return the altitude, in meters:
n
>>> loc.altitude
292.39999399999999
>>>
7. Use Ctrl-D to exit the Python session. You can also exit the session using exit() or quit().
Update the location data
The location submodule takes a snapshot of the current location and stores it in the runtime
database. You can update this snapsot:
1. Select a device in Remote Manager that is configured to allow shell access to the admin user,
and click Actions > Open Console. Alternatively, log into the LR54 local command line as a
user with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
# python
Python 3.10.1 (default, May
[GCC 8.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
3. Import the location submodule:
>>> from digidevice import location
LR54 User Guide
9 2021, 22:49:59)
Develop Python applications
739