Default Outbound Wan/Wwan Ports - Digi LR54 User Manual

Interfaces
3. Use the del command to delete the WAN or WWAN. For example, to delete a WWAN named
my_wwan:
(config)> del network interface my_wwan
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Default outbound WAN/WWAN ports

The following table lists the default outbound network communications for LR54 WAN/WWAN
interfaces:
Description
Digi Remote Manager connection to my.devicecloud.com
NTP date/time sync to time.devicecloud.com
DNS resolution using WAN-provided DNS servers
HTTPS for modem firmware downloads from firmware.accns.com
LR54 User Guide
Wide Area Networks (WANs)
TCP/UDP Port number
TCP 3199
UDP 123
UDP 53
TCP 443
148