Show Surelink Status For A Specific Interface; Show Surelink Status For All Ipsec Tunnels - Digi LR54 User Manual

Interfaces
2. At the Admin CLI prompt, type :
> show surelink interface all
Interface
---------
wan1
wan1
lan1
lan1
wwan
wwan
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Show Surelink status for a specific interface

To show the Surelink status a specific interface, use the
command:
1. Select the device in Remote Manager and click Actions > Open Console, or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the show surelink interface name name
interface, for example:
> show surelink interface name wan1
Interface
---------
wan1
wan1
Passingsing
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Show Surelink status for all IPsec tunnels

To show the Surelink status all IPsec tunnels, use the
1. Select the device in Remote Manager and click Actions > Open Console, or log into the LR54
local command line as a user with full Admin access rights.
LR54 User Guide
Test
-----------------------------
Interface is up
Interface's DNS servers (DNS)
Interface is up
Interface's DNS servers (DNS)
Interface is up
Interface's DNS servers (DNS)
Test
-----------------------------
Interface is up
Interface's DNS servers (DNS)
Show Surelink status and statistics
Proto Last Response
----- -------------
IPv4 32 seconds
IPv4 28 seconds
IPv4 21 seconds
IPv4 20 seconds
IPv4 115 seconds
IPv4 114 seconds
show surelink interface name name
command to show the Surelink status of a specific
Proto Last Response
----- -------------
IPv4 32 seconds
IPv4 28 seconds
show surelink ipsec all
Status
-------
Passing
Passing
Passing
Passing
Passing
Passing
Status
-------
Passing
command:
210