Digi LR54 User Manual page 190

Interfaces
6. Save the configuration and apply the change:
(config network interface lan1 ipv4 dhcp_relay 1)> save
Configuration saved.
>
7. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show DHCP server status and settings
View DHCP status to monitor which devices have been given IP configuration by the LR54 device and
to diagnose DHCP issues.

Web
1. Log into the LR54 WebUI as a user with Admin access.
2. On the main menu, click Status
3. Under Networking, click DHCP Leases.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Enter the show dhcp-lease
> show dhcp-lease
IP Address
-------------
192.168.2.194
192.168.2.195
>
3. Additional information can be returned by using the
> show dhcp-lease verbose
IP Address
MAC Address
-------------
-----------------
192.168.2.194
ba:ba:2c:13:8c:71
192.168.2.195
09:eb:10:f0:bc:16
LR54 User Guide
command at the Admn CLI prompt:
Hostname Expires
--------------- -------
MTK-ENG-USER1
MTK-ENG-USER2
Hostname Expires
-------- ------------------------
MTK-ENG-USER1 May 19 08:25:11 UTC 2021
MTK-ENG-USER2 May 20 11:32:12 UTC 2021
Local Area Networks (LANs)
show dhcp-lease verbose
Type
-------
Dynamic
Dynamic
command:
Active
------
Yes
Yes
190