Applications
For example:
To upload a script from a remote host with an IP address of 192.168.4.1 to the
/etc/config/scripts directory on the LR54 device, issue the following command:
> scp host 192.168.4.1 user admin remote /home/admin/bin/test.py local
/etc/config/scripts/ to local
admin@192.168.4.1's password: adminpwd
test.py
>
c. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Note
You can also create scripts by using the vi command when logged in with shell access.
2. Select a device in Remote Manager that is configured to allow shell access to the admin user,
and click Actions > Open Console. Alternatively, log into the LR54 local command line as a
user with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
3. Use the python command to run the Python application. In the following example, the Python
application, test.py, takes 3 parameters: 120, ports and storage:
# python /etc/config/scripts/test.py 120 ports storage
Configure scripts to run manually
You can configure an scripts to be manually run.
Required configuration items
Upload or create the script.
n
Enable the script.
n
Set the script to run manually.
n
Additional configuration items
A label used to identify the script.
n
The arguments for the script.
n
Whether to write the script output and errors to the system log.
n
The memory available to be used by the script.
n
Whether the script should run one time only.
n
Task one: Upload the application
Web
LR54 User Guide
Configure scripts to run manually
100%
36MB
11.1MB/s
00:03
766