Digi LR54 User Manual page 799

User authentication
3. Click Authentication > Users.
4. In Add User, type a name for the user and click .
The user configuration window is displayed.
The user is enabled by default. To disable, toggle off Enable.
5. (Optional) For Username alias, type an alias for the user.
Because the name used to create the user and cannot contain special characters such as
hyphens (-) or periods (.), an alias allows the user to log in using a name that contains special
characters. For security purposes, if two users have the same alias, the alias will be disabled.
6. Enter a password for the user. The password must be at least eight characters long and must
contain at least one uppercase letter, one lowercase letter, one number, and one special
character.
7. Click to expand Login failure lockout.
The login failure lockout feature is enabled by default. To disable, toggle off Enable.
a. For Lockout tries, type the number of unsuccessful login attempts before the user is
locked out of the device. The default is 5.
b. For Lockout duration, type the amount of time that the user is locked out after the
number of unsuccessful login attempts defined in Lockout tries.
Allowed values are any number of minutes, or seconds, and take the format number{m|s}.
LR54 User Guide
Local users
799